Rack Mounted 48volts LiFePO4 48V 50ah Batterie Au Lithium for Solar and Telecom Stations

Basic Info

Standby UPS	Sine Wave Output UPS
Output Capacity	Large Type
Equipment Mode	Centralized Model
Brand	Anor
Storage Ambient Temperature/Relative Hum	Normal Temperature 6 Months Recharge; Charge and D
Market	Europe
Main Market	North America
Certification	Rosh/ CE/ FCC/ Yuv
Move	Trolley Case Design
Solar Inverter	Built-in Inverter
Output Voltage(AC)/ Frequency (Hz)	220/240VAC& Plusmn;5% 50/60Hz±5%
Display	LCD Display
Charging Protection Function	Overvoltage Protecting
Output Protection	Output Undervoltage/ Overcurrent Protection
Reverse	Anit-Reverse Protection
Temperature Protection	Low/ High Temperature Protection
Transport Package	Carton
Specification	668*486*828mm 143KG/160KG
Trademark	Anor
Origin	Made in China
HS Code	8507802000
Production Capacity	3000PCS/Week

Product Description

Rack Mounted 48volts LiFePO4 48V 50ah Batterie Au Lithium for Solar and Telecom Stations1. OEM/ODM are accepted

2. Voltage / capacity could be customized

3. Battery could be customized

4.Could offer all the solar system

Advantages

Top-Quality Lifepo4 Cell

ANOR lithium battery pack utilizes grade-A quality 3.2V prismatic lifepo4 battery cells. Every cell is 100% new guaranteed and strictly capacity graded to ensure high conformity of cells used in the battery module.

Multiple Protection BMS
The lithium battery features an elegant BMS that provides multiple protections to keep the battery operating safely:
-Overcharge protection function -Overdischarge protection function
-Over current protection function -Over voltage protection function
-Temperature protection function -Short circuit protection function

Large product capacity and small size.
3kwh = 25.6V *120AH 480*310*688cm N.W: 45kg G.W: 56kg
5kwh = 51.2V *100AH 480*310*688mm N.W: 45kg G.W: 86kg
10KWH = 51.2V *200AH 668*480*828cm N.W: 143kg G.W: 160kg

USE width
1" Ups power supply Can be used as an emergency power supply for offices/hospitals/schools/factories, etc. to ensure that all electrical appliances are not powered up
2" Off-grid system can be used for home, outdoor, construction work, etc.
3" On-grid system can be connected to the whole solar system and wind energy system.

Shortened 4 times Charging time
The charging power reaches 40A. Currently ≤10A, if you use a 400W solar panel, it is expected to take 13-14 hours to fully charge; at present, we can provide fast charging

The conversion efficiency is greater than 93%.
The charging inverter can use solar energy charging, mains charging, generator charging, charging pile charging and other large-capacity energy storage battery charging, our conversion efficiency can reach 93%, Shorten the charging time and maximize the use of electric energy.

Easy to use.
No additional inverter is required for charging, and no inverter is required for discharging.

Battery Type	LiFePO4
Battery capacity	3KWH	5KWH	10KWH
Voltage (V)/ Current (A)	25.6V/120A	51.2V /100AH	51.2V/200AH
Product size	480*310*688mm	480*310*688mm	668*486*828mm
N.W/G.W	45Kg /56KG	75KG/86KG	143KG/160KG
Discharge Norminal power	3KWH	5KW	10KWH
Maximum continuous output power	2.4KW	4KW	8kw
Input Voltage(VDC)	40-51.2V
Output Voltage(AC)/frequency(HZ)	220/240VAC±5% 50/60Hz±5%
PV panel access allowable voltage and current	PV access voltage≤100V, PV access current≤30A
Conversion Efficiency	≥93%
AC Output Wave	Pure Sine Wave
DC output	1.DC:12V/20A 2.USB:5V/1A 2.1A
LCD	Size	60*30MM
	Color	Black and white display
	Use	1.Battery dis-/charge display2.Load capcity ,frequency3.AC input and output status and voltage
Profect Function	Charging overvoltage protection	YES
	Discharge undervoltage protection	YES
	Discharge overcurrent protection	YES
	Anti-reverse protection	YES
	Short circuit protection	YES
	Temperature protection	YES
Operating ambient temperature	'-10-40ºC
Storage ambient temperature/relative humidity	Temperature: -20-+60ºC Humidity: 10%-90% Non-condensingRemark: Normal temperature 6 months recharge; charge and discharge once, then recharge to 25%
Operating altitude	0-3000 meters, Higher than 1000 meters, it is recommended to reduce the Nominal capacity of the machine

Our company

Since 2006

Anor New Energy Technology was founded in 2006, dedicated to researching and promoting new, cleaner and more economical energy sources to make people's lives more convenient.

Main Products

We specialize in lithium battery packs, energy storage lithium batteries, solar system storage power, outdoor power, BMS systems, etc.

We also develop some relevant derivative products with reliable quality according to customer's requirements to support them in developing markets and saving their cost.

With BMS R&D and production department

All the battery products of Anor use our own BMS system, which is developed and produced by us to guarantee the battery quality.

20 Production Lines

Up to now we have 5 battery pack assembly lines, 4 power pack lines, 4 outdoor small storage pack lines, 4 large capacity solar system storage lines, 3 BMS lines

Our Partner: BYD CATL

We have established long-term and stable strategic partnerships with BYD, CATL which are leading global lithium-ion battery R&D and manufacturing companies. This protects our high and stable product quality and greatly reduces our production cost to provide better quality products and services to our customers.

 

Hot selling

 

RFQ

1. Warranty period and spare parts replacement?
Our products are guaranteed for 3 years, and spare parts can be replaced.

2. Agency market, how to help customers build brands
We have a mature marketing team and our own independent station, which can help our clients to develop targeted markets.

3. Is it possible to OEM? Do you have R&D capability? and non-disclosure agreement
Yes, OEM can be carried out, and R&D can be carried out according to customer requirements. For products developed by customers, we will have relevant confidentiality agreements to ensure the security of customers' intellectual property rights.

4. How to get samples? Ordinary sample cycle, custom sample cycle?
For conventional samples, our lead time is 3 days. If you need OEM or research and development, you need to negotiate. When price is negotiated, you can consider taking samples, and we will charge the sample fee and shipping fee. These fees will be refunded in bulk

5.Shipping problem
1. We will pack the goods perfectly and rent compliant cabins for transportation. We have cooperative and mature customs brokers and freight forwarding companies, as well as mature insurance companies, to ensure the safe transportation of goods in an all-round way.

6.How To Ask for support if products failure in warranty? 1. Email us about PI number, serial number,Product S/N number, show us more details such as: pictures, your testing report or video, if it is the quality problem of product itself, we will resend a new one. 2. we will submit your case to our local team and solve it in 24 hours.